PM

Description

PM peripheral pumps

Best price 1 inch 220 volt PM 0.5 hp 0.75hp 1hp rate domestic garden electric motor vortex water pump for house

This series peripheral pumps have relatively simple construction and are very economical ,reliable and safe. They are particularly suitable for domestic applications such as supply water from well, pool etc, the automatic distribution of water by surge tanks and pressure switch, and increasing of water pressure.

Application

Suitable for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the materials from which the pump is made.

They are easy to use and are economical, they are ideal for domestic use and in particular for distributing water in combination with small pressure sets and for the irrigation of gardens and allotments.

The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.

• Volumetric water pumps able to offer high pressures in relation to comparatively low powers and which have particularly steady operating curves.

• They are qualified in domestic fittings, to in crease the system pressure in aqueducts and for automatic water distribution by small autoclave tanks or by hydrosphere units.

• For the correct functioning of the pump, use clean water, or non-aggressive liquids only, without sand or other solid

Motor

Two-pole induction motor(n=2850 r.p.m)
Insulation Class B
Protection IP44
Continuous service S1
Thermal protector
Single-phase 220V/50Hz, 60Hz if request

Operating conditions

Liquid temperature up to 60℃
Ambient temperature up to 40℃
Total suction lift up to 8m

Component Construction

Pump body: Cast iron, with brass/AISI304 SS insert if request

Pump support: Cast iron, with brass/AISI304 SS insert if request

Motor housing: aluminium

Impeller: Brass

Motor shaft: Carbon steel, AISI304 SS if request

Mechanical seal: Ceramic/Graphite

Bearing: C & U, NSK

TECHNICAL DATA